geekery

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
==== installation notes ====

=== External YUM repos needed === 
  * geekery
  * epel

=== Packages === 
  * nut
  * nut-cgi 
  * nut-client
  * nut-xml
  * nut-hal

=== Installation commands === 

== CentOS 5 ==

  * i386: <code>yum install nut nut-cgi nut-client</code>
  * x86_64: <code>yum install nut.x86_64 nut-cgi.x86_64 nut-client.x86_64</code>

== CentOS 6 ==

  * i686: <code>yum install nut nut-cgi nut-client</code>
  * x86_64: <code>yum install nut.x86_64 nut-cgi.x86_64 nut-client.x86_64</code>

=== UDEV RULES installation instructions for USB UPSes ===
<code>
ln -s /lib/udev/rules.d/62-nut-usbups.rules /etc/udev/rules.d/62-nut-usbups.rules
udevcontrol reload_rules
udevtrigger
/etc/init.d/ups restart
</code>





==== nut build config ====

== CentOS 5 ==

Configuration for 2.61 version:

<code>

Configuration summary:
======================
build serial drivers: yes
build USB drivers: yes
build SNMP drivers: yes
build neon based XML driver: yes
build Powerman PDU client driver: yes
enable SSL development code: yes
enable libwrap (tcp-wrappers) support: yes
build CGI programs: yes
enable HAL support: yes
build and install documentation: no
build and install the development files: yes

</code>

Configuration for 2.64 version:

<code>

Configuration summary:
======================
build serial drivers: yes 
build USB drivers: yes 
build SNMP drivers: yes 
build neon based XML driver: yes 
enable Avahi support: yes 
build Powerman PDU client driver: yes 
build IPMI driver: no 
enable SSL development code: yes 
enable libwrap (tcp-wrappers) support: yes 
enable libltdl (Libtool dlopen abstraction) support: yes 
build CGI programs: yes 
enable HAL support: yes 
build and install documentation: no 
build and install the development files: no

</code>

== CentOS 6 ==

Configuration for 2.61 version:

<code>
Configuration summary:
======================
build serial drivers: yes
build USB drivers: yes
build SNMP drivers: yes
build neon based XML driver: yes
build Powerman PDU client driver: yes
enable SSL development code: yes
enable libwrap (tcp-wrappers) support: yes
build CGI programs: yes
enable HAL support: yes
build and install documentation: no
build and install the development files: yes

</code>

Configuration for 2.64 version:

<code>
Configuration summary:
======================
build serial drivers: yes 
build USB drivers: yes 
build SNMP drivers: yes 
build neon based XML driver: yes 
enable Avahi support: yes 
build Powerman PDU client driver: yes 
build IPMI driver: no 
enable SSL development code: yes 
enable libwrap (tcp-wrappers) support: yes 
enable libltdl (Libtool dlopen abstraction) support: yes 
build CGI programs: yes 
enable HAL support: yes 
build and install documentation: no 
build and install the development files: no

</code>